Entron EN6001 Constant Current AC Weld Controls

FOR SALE at Weld Systems Integrators

The Entron EN6001 constant current weld controls for resistance welding meet the needs of modern manufacturing. Furthermore, it improves on Entron’s popular workhorse, the EN1000, with a more intuitive interface for easier programming and better operator feedback. The EN6001 is also available as a retrofit kit to replace the faceplate and internals of an existing EN1000.

In addition to the configurations listed, the EN6001 has additional options for communication protocols (MODBUS and Ethernet/IP) and supervisor controls such as Program Lockout and Error Resets.

ENTRON Controls - EN6001 | Weld Systems Integrators

Entron EN6001 weld controls are FOR SALE at Weld Systems Integrators (WSI). WSI is a distributor of ENTRON resistance welding controls, maintaining an IN-STOCK inventory at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.

  • Program Lockout (key switch)
  • Operation Mode Switch (Program Lockout and Weld/No Weld)
  • Error Reset Switch
  • Optional plug-in Ether-net card provides PLC compatibility via MODBUS and EtherNet/IP for remote I/O
  • Constant current regulation; Primary / Secondary feedback
  • Current monitoring with high, low, and pre-limits
  • Up to 64 programs (internal or 16 external selection)
  • On Timer Membrane Keyboard with backlit 128×64 (8 lines) LCD graphic display
  • Six (6) inputs and four (4) outputs with output protection on CPU
  • Electrode management functions, including stepping, tip-dressing and preset curves
  • Welding programs may be linked together for complex spot schedules (chained or successive) Refresh firmware through USB device
  • Load/export control settings from/to USB device
  • AC 60/50 Hz welding supported
  • Spot / Pulsation / Seam welding / Flash or Butt welding / Brazing
  • Multiple weld intervals plus pulsation, upslope and downslope
  • Air-over-oil gun operation
  • Retraction – maintained, and momentary
  • Water Saver (contactor timer)
  • Head lock function
  • Phase shift monitor
  • Half-cycle operation (Alt. / Pos. / Neg.)
  • Low cost
  • Easier to program
  • More I/O
  • USB backup Port
  • Schedule Number: 0 to 63
  • Squeeze Delay: 0 to 99 cycles
  • Squeeze: 0 to 99 cycles
  • Valve Mode: None / All combinations of 3 valves
  • Weld1: 0 to 99 cycles
  • Weld1 Current Regulation Mode: Phase Shift / Constant Current
  • Heat1: 0 to 99%
  • Current1: 0 to 100.00 kA
  • Cool1: 0 to 99 cycles
  • Slope: 0 to 99 cycles
  • Weld2: 0 to 99 cycles
  • Weld2 Current Regulation Mode: Phase Shift / Constant Current
  • Heat2: 0 to 99%
  • Current2: 0 to 100.00 kA
  • Cool2: 0 to 99 cycles
  • Hold: 0 to 99 cycles
  • Off: 0 to 99 cycles
  • Impulses: 1 to 99 cycles
  • Heat/Current Offset: -15 to +15%
  • Cycle Mode: Non-repeat / Repeat / Chained / Successive / Wait-here

Contact Weld Systems Integrators

Weld Systems Integrators (WSI) is your complete source for standard and custom resistance welders, consumables, spare and replacement parts and value added services. We offer WORLDWIDE shipping from our Warrensville Heights, OH location.

CONTACT Weld Systems Integrators, or REQUEST A QUOTE on standard IN-STOCK inventory or fully custom welding equipment. To speak with a WSI team member, please give us a call at 844-WSI-WELD or +1-216-475-5629.

© ENTRON Controls