NEW Entron Weld Controls – EN6001-1200C
WSI Serial #: 59884-03
ENTRON Part #: 10-33-0C-00-01-AO-00-00
Entron Weld Controls – EN6001-1200C- WITHOUT DISCONNECTS [ part # 10-33-0C-00-01-AO-00-00 | WSI Serial # 59884-03] IN-STOCK and FOR SALE at Weld Systems Integrators.
WSI is a distributor of ENTRON resistance welding controls, maintaining an IN-STOCK inventory at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.
EQUIPMENT QUOTEPlease submit the following form to request additional information.
Enter WSI Serial #: 59884-03 on the following quote request form.
If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.
SPECIFICATIONS | Serial #: 59884-03 |
---|---|
Manufacturer Name: | ENTRON |
Type: | Weld Control |
Mfg. Model #: | EN6001-1200C |
Low cost | |
Easier to program | |
More I / O | |
USB backup port | |
Schedule Number: | 0 to 63 |
Squeeze Delay: | 0 to 99 cycles |
Squeeze: | 0 to 99 cycles |
Valve Mode: | None / All combinations of 3 valves |
Weld1: | 0 to 99 cycles |
Weld1 Current Regulation Mode: | Phase Shift / Constant Current |
Heat1: | 0 to 99% |
Current1: | 0 to 100.00 kA |
Cool1: | 0 to 99 cycles |
Slope: | 0 to 99 cycles |
Weld2: | 0 to 99 cycles |
Weld2 Current Regulation Mode: | Phase Shift / Constant Current |
Heat2: | 0 to 99% |
Current2: | 0 to 100.00 kA |
Cool2: | 0 to 99 cycles |
Hold: | 0 to 99 cycles |
Off: | 0 to 99 cycles |
Impulses: | 1 to 99 cycles |
Heat / Current Offset: | -15 to +15% |
Cycle Mode: | Non-repeat / Repeat / Chained / Successive / Wait-here |
General Condition: | NEW |
Additional Details: | – |
Warranty: | 1 Year |
Availability: | Immediate |
- Program Lockout (key switch)
- Weld/No Weld Switch
- Water Flow Switch
- Counter Reset Pushbutton
- Optional Mode Switch (program Lockout and Weld/No Weld)
- Plug-in Ethernet card provides PLC compatibility via Modbus and E/IP for remote I/O
- Constant current regulation; Primary / Secondary feedback
- Current monitoring with high, low, and pre-limits
- Up to 64 programs (internal or 16 external selection)
- On Timer Membrane Keyboard with backlit 128×64 (8 lines) LCD graphic display
- Six (6) inputs and four (4) outputs with output protection on CPU
- Electrode management functions, including stepping, tip-dressing and preset curves
- Welding programs may be linked together for complex spot schedules (chained or successive) Refresh firmware through USB device
- Load/export control settings from/to USB device
- AC 60/50 Hz welding supported
- Spot / Pulsation / Seam welding / Flash or Butt welding / Brazing
- Multiple weld intervals plus pulsation, upslope and downslope
- Air-over-oil gun operation
- Retraction – maintained, and momentary
- Water Saver (contactor timer)
- Head lock function
- Phase shift monitor
- Half-cycle operation (Alt. / Pos. / Neg.)
DOCUMENTS
User manual EN6001 700230H
Instruction Manual for Communication Specifications for EN6001 700231E
TECHNICAL NOTES
ENTRON Controls Conduction Monitoring Application Note 700245
EN6001 EIP Communication Configuration Application Note 700237A
EN6001 Weld Schedule Quick Start Application Note 700242
EN6001 Easy Weld Application Note 700246
EN6001 – Soft Touch Configuration Application Note 700244
EN6001 – Transgun Application Note 700252A
WIRING DIAGRAMS
EN6001 Wiring Diagram 421537D
EN6001 Wiring Diagram for Transgun Control 421533-001a
EN6001 Wiring Diagram of Ground Fault addition to D Cabinet 421561
BROCHURES