Tuffaloy Resistance Welding Products – Double Bend Electrodes FOR SALE

IN-STOCK and Available NOW from Weld Systems Integrators

Tuffaloy double bend electrodes (standard cold-formed electrodes) are bent from straight electrodes (some after added machining) and have the same hardness and conductivity. They outlast, many times over, the old cast and forged electrodes of similar geometry, which are impossible to cool adequately.

Tuffaloy Double Bend Electrode Ordering | Weld Systems Integrators

The table shows a wide range of electrodes generally available from stock. For sizes not shown, refer to the diagrams and description key at the bottom of the page, and order what you need. All measurements will be accurate. However, over-all length, in 1/8-in. multiples, will be held to within 1/16-in.

Tapers, water holes, and nose designs are the same as the standard straight electrodes in this catalog. Water tubes can be furnished.

Standard nose designs other than those shown here may be furnished on short order. Follow the “Key to Description”, using a ‘B’ for Dome nose, ‘C’ for flat nose, ‘E’ for truncated cone, and ‘F’ for radius nose.

DOUBLE-BEND, WITH STANDARD NOSE DESIGNS

Bent Electrodes 4RW Taper

Length	Offset	CLASS 1 A Pointed Nose Description	CLASS 1 A Pointed Nose Part Num	CLASS 1 D Offset Nose Description	CLASS 1 D Offset Nose Part Num	CLASS 2 A Pointed Nose Description	CLASS 2 A Pointed Nose Part Num	CLASS 2 D Offset Nose Description	CLASS 2 D Offset Nose Part Num
1-1/16	1/2					FA-2317-8	167-0060
2-3/16	1							FD-2423-16	167-2080
2-1/4	1/2	FA-1424-8	165-0100			FA-2424-8	167-0100
2-1/4	3/4					FA-2424-12	167-0120
2-3/8	3/8	FA-1426-6	165-0160			FA-2426-6	167-0160
2-3/8	3/4					FA-2426-12	167-0180
2-3/8	1-1/4	FA-1426-20	165-0200	FD-1426-20	165-2200	FA-2426-20	167-0200	FD-2426-20	167-2200
2-1/2	1/2					FA-2428-8	167-0240
2-1/2	1	FA-1428-16	165-0280	FD-1428-16	165-2280	FA-2428-16	167-0280	FD-2428-16	167-2280
2-5/8	3/4	FA-14210-12	165-0320			FA-24210-12	167-0320	FD-24210-12	167-2320
2-3/4	1/2	FA-14212-8	165-0360			FA-24212-8	167-0360	FD-24212-8	167-2360
2-3/4	1					FA-24212-16	167-0400
2-3/4	1-1/4					FA-24212-20	167-0420
2-7/8	3/4					FA-24214-12	167-0430
2-7/8	1-1/4	FA-14214-20	165-0460			FA-24214-20	167-0460
3	1	FA-1430-16	165-0520			FA-2430-16	167-0520
3-3/8	1-1/4					FA-2436-20	167-0580
3-1/2	1					FA-2438-16	167-0620

Bent Electrodes 5RW Taper

Length	Offset	CLASS 1 A Pointed Nose Description	CLASS 1 A Pointed Nose Part Num	CLASS 1 D Offset Nose Description	CLASS 1 D Offset Nose Part Num	CLASS 2 A Pointed Nose Description	CLASS 2 A Pointed Nose Part Num	CLASS 2 D Offset Nose Description	CLASS 2 D Offset Nose Part Num
2-1/4	1/2							FD-2524-8	167-3100
2-1/4	1-1/4			FD-1524-20	165-3140			FD-2524-20	167-3140
2-3/8	3/8	FA-1526-6	165-1160			FA2526-6	167-1160	FD-2526-6	167-3160
2-3/8	3/4			FD-1526-12	165-3180	FA-2526-12	167-1180	FD-2526-12	167-3180
2-1/2	1/2	FA-1528-8	165-1240			FA-2528-8	167-1240
2-1/2	1					FA-2528-16	167-1280
2-3/4	1/2	FA-15212-8	165-1360	FD-15212-8	165-3360	FA-25212-8	167-1360	FD-25212-8	167-3360
2-3/4	3/4					FA-25212-12	167-1380
2-3/4	1	FA-15212-16	165-1400	FD-15212-16	165-3400	FA-25212-16	167-1400	FD-25212-16	167-3400
2-7/8	1					FA-25214-16	167-1440
2-7/8	1-1/4	FA-15214-20	165-1460			FA-25214-20	167-1460
3	1/2	FA-1530-8	165-1480			FA-2530-8	167-1480	FD-2530-8	167-3480
3	3/4					FA-2530-12	167-1500
3	1					FA-2530-28	167-1540	FD-2530-16	167-3520
3-1/4	1	FA-1534-16	165-1560			FA-2534-16	167-1560
3-3/8	3/8			FD-1536-6	165-3570
3-3/8	1-1/4	FA-1536-20	165-1580	FD-1536-20	165-3580	FA-2536-20	167-1580	FD-2536-20	167-3580
3-1/2	1/2	FA-1538-8	165-1600			FA-2538-8	167-1600
3-1/2	1					FA-2538-16	167-1620	FD-2538-16	167-3620

RETURN TO TUFFALOY STANDARD ELECTRODES

Contact Weld Systems Integrators

Weld Systems Integrators (WSI) is your complete source for standard and custom resistance welders, consumables, spare and replacement parts and value added services. We offer WORLDWIDE shipping from our Warrensville Heights, OH location.

CONTACT Weld Systems Integrators, or REQUEST A QUOTE on standard IN-STOCK inventory or fully custom welding equipment. To speak with a WSI team member, please give us a call at 844-WSI-WELD or +1-216-475-5629.

Quote Request EMail WSI

Products and Services from Weld Systems Integrators
Resistance Welders	Projection Welding	Custom Welding Automation	Supplies				Value Added Services
Resistance Welders	Projection Welding	Custom Welding Automation	Welding Consumables	Spare Parts	Welding Accessories	Available Brands	Value Added Services