Western Arctronics Welder Parts, Repairs and Rebuilds
Support services for Western Arctronics welders from Weld Systems Integrators
Western Arctronics welder repair and rebuild services available from Weld Systems Integrators. WSI service professionals are trained and qualified to repair and rebuild Western Arctronics rocker arm spot welders, often including technology upgrades to improve welder efficiency and productivity. Furthermore, WSI also provides spare or replacement parts.
Looking for a NEW rocker arm spot welder?
Be sure to check out our line of WSI series welders or our IN-STOCK TECNA rocker arm spot welders.
Western Arctronics – Foot Pedal Operated
| Model | KVA | Arm Length | Short Circuit Current Max | Capacity 2 pieces | Arm Diameter | Arm Spacing Min-Max* | Tip Holder Diameter ** | # Heat Settings | Spec Plate Rating ***** | Shipping Weight *** |
|---|---|---|---|---|---|---|---|---|---|---|
| 130****** | 5 | Adjustable 12″ to 20″ |
6,000 to 4,500 |
18 ga. max | 1″ | 5-1/4″ | 5/8″ | 5 | 40A | 200 |
| 10 | 10 | 12″ 18″ 24″ |
8,500 6,500 5,500 |
13 ga. 16 ga. 18 ga. |
1-1/2″ | 4-1/2″, 8-3/4″ | 3/4″ | 5 | 53A | 350 |
| 15 | 15 | 12″ 18″ 24″ 30″ |
10,000 9,000 8,000 7,000 |
12 ga. 13 ga. 14 ga. 16 ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 63A | 500 |
| 30 | 30 | 12″ 18″ 24″ 30″ |
19,000 15,500 13,500 12,000 |
8 ga. 9 ga. 10 ga. 11ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 100A | 650 |
| 40 | 40 | 12″ 18″ 24″ 30″ 36″ |
23,000 18,000 16,000 14,000 12,000 |
7 ga. 8 ga. 9 ga. 10 ga. 11 ga. |
2-1/2″ | 6.5″ 11.5″ |
1″ | 7 | 170A | 920 |
| 50 | 50 | 12″ 18″ 24″ 30″ 36″ |
25,000 21,000 18,000 16,000 14,500 |
6 ga. 7 ga. 8 ga. 9 ga. 10 ga. |
2-1/2″ | 6.5″ 11″ |
1″ | 7 | @460V 105A**** | 950 |
Western Arctronics – Air Operated Semi-Automatic
| Model | KVA | Arm Length | Short Circuit Current Max | Capacity 2 pieces | Arm Diameter | Arm Spacing Min-Max * | Tip Holder Diameter ** | # Heat Settings | Spec Plate Rating ***** | Shipping Weight *** |
|---|---|---|---|---|---|---|---|---|---|---|
| 130****** | 5 | Adjustable 12″ to 20″ |
6,000 to 4,500 |
18 ga. max | 1″ | 5-1/4″ | 5/8″ | 5 | 40A | 200 |
| 10 | 10 | 12″ 18″ 24″ |
8,500 6,500 5,500 |
13 ga. 16 ga. 18 ga. |
1-1/2″ | 4-1/2″, 8-3/4″ | 3/4″ | 5 | 53A | 350 |
| 15 | 15 | 12″ 18″ 24″ 30″ |
10,000 9,000 8,000 7,000 |
12 ga. 13 ga. 14 ga. 16 ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 63A | 500 |
| 30 | 30 | 12″ 18″ 24″ 30″ |
19,000 15,500 13,500 12,000 |
8 ga. 9 ga. 10 ga. 11ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 100A | 650 |
| 40 | 40 | 12″ 18″ 24″ 30″ 36″ |
23,000 18,000 16,000 14,000 12,000 |
7 ga. 8 ga. 9 ga. 10 ga. 11 ga. |
2-1/2″ | 6.5″ 11.5″ |
1″ | 7 | 170A | 920 |
| 50 | 50 | 12″ 18″ 24″ 30″ 36″ |
25,000 21,000 18,000 16,000 14,500 |
6 ga. 7 ga. 8 ga. 9 ga. 10 ga. |
2-1/2″ | 6.5″ 11″ |
1″ | 7 | @460V 105A**** | 950 |
Western Arctronics – Air Operated Fully Automatic
| Model | KVA | Arm Length | Short Circuit Current Max | Capacity 2 pieces | Arm Diameter | Arm Spacing Min-Max * | Tip Holder Diameter ** | # Heat Settings | Spec Plate Rating ***** | Shipping Weight *** |
|---|---|---|---|---|---|---|---|---|---|---|
| 130****** | 5 | Adjustable 12″ to 20″ |
6,000 to 4,500 |
18 ga. max | 1″ | 5-1/4″ | 5/8″ | 5 | 40A | 200 |
| 10 | 10 | 12″ 18″ 24″ |
8,500 6,500 5,500 |
13 ga. 16 ga. 18 ga. |
1-1/2″ | 4-1/2″, 8-3/4″ | 3/4″ | 5 | 53A | 350 |
| 15 | 15 | 12″ 18″ 24″ 30″ |
10,000 9,000 8,000 7,000 |
12 ga. 13 ga. 14 ga. 16 ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 63A | 500 |
| 30 | 30 | 12″ 18″ 24″ 30″ |
19,000 15,500 13,500 12,000 |
8 ga. 9 ga. 10 ga. 11ga. |
2″ | 4.5″ 11″ |
1″ | 5 | 100A | 650 |
| 40 | 40 | 12″ 18″ 24″ 30″ 36″ |
23,000 18,000 16,000 14,000 12,000 |
7 ga. 8 ga. 9 ga. 10 ga. 11 ga. |
2-1/2″ | 6.5″ 11.5″ |
1″ | 7 | 170A | 920 |
| 50 | 50 | 12″ 18″ 24″ 30″ 36″ |
25,000 21,000 18,000 16,000 14,500 |
6 ga. 7 ga. 8 ga. 9 ga. 10 ga. |
2-1/2″ | 6.5″ 11″ |
1″ | 7 | @460V 105A**** | 950 |
* Measured with arms parallel – can be adjusted to increased spacing at tips.
** Tip holders machined for #1 morse taper, #2 morse taper on 50 KVA.
*** Weights vary as to model type and arm lengths.
**** The 50 kVA units are standard 460 volts, single phase, air operated or fully automatic. 208 volt and 230 volt also available.
***** For electrical requirements, consult your local governing code authorities for local requirements.
****** Western Arctronics Model 130 (5 kVA) is generally not recommended for welding galvanized material.
NOTE: This chart is for cold rolled steel and stainless steel. Application for black iron or scaly metal would be 1 step down, galvanized metal would be 2 to 3 steps down.
Contact Weld Systems Integrators
CONTACT Weld Systems Integrators, or REQUEST A QUOTE on standard IN-STOCK inventory or fully custom welding equipment. To speak with a WSI team member, please give us a call at 844-WSI-WELD or +1-216-475-5629.
| Products and Services from Weld Systems Integrators | |||||||
|---|---|---|---|---|---|---|---|
| Resistance Welders |
Projection Welding |
Custom Welding Automation |
Supplies | Value Added Services |
|||
| Welding Consumables |
Spare Parts |
Welding Accessories |
Available Brands |
||||