TECNA 7913 Portable Spot Weld Gun – Pneumatic, Gyroscopic, 6 kVA Water-Cooled
WSI-SELECT – In-Stock and For Sale at Weld Systems Integrators
TECNA 7913 Weld Gun – Serial #: W-3182
NEW TECNA TECNA 7913 pneumatic, gyroscopic, 6 kVA water-cooled portable spot weld gun [ WSI stock / serial #: 3182 ] IN-STOCK and FOR SALE at Weld Systems Integrators.
- Model: TECNA 7193
- Power @ 50% duty cycle: 6 kVA
- Power supply: Single-phase AC
- Max. weld current: 6,550 amps
- Max. weld force: 269 lbs. (4.9 in. arms), 85 lbs. (19.7 in. arms)
- Max. electrode throat depth: 4.9 – 19.7 in. (125 – 500 mm)
- Max. projection plate throat depth: —
The TECNA WTG-7913 is ideal for body repair, light sheet metal fabrication, and other maintenance applications.
There are a variety of arms available for this unit, further enabling a wide range of applications. In addition, the TECNA 7913 comes standard with an electronic timer that operates the differential pressure switch when the electrode force is correct. A compensation circuit starts the timer only when there is a proper range of current which allows welding on oxidized sheets or materials with a painted surface.
Please submit the following form to request additional information.
Enter WSI Serial #: W-3182 on the following quote request form.
If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.
- Fully water-cooled portable spot gun
- For high operating rate works in car body repair and light production works.
- Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
- The compensation circuit starts the timer only when there is a proper passage of current, which enables it to perform on oxidized sheets, surfaces with paint residues, or black sheets.
- Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheets, and similar.
- Balanced construction for easy operation.
- Thread base for fixing on a bench.
- A built-in differential pressure switch operates the timer when the electrode force is correct.
- Additional arm couplings to provide a larger opening between arms.
- All transformers are coated with F-class insulation material. Insulation test performed at 4000 V.
- To be used with arms item 7512 – 7513 – 7514 – 7515 (on request).
SPECIFICATIONS | WTG-7913 |
---|---|
Gun type | Scissor |
Manual / pneumatic | Pneumatic |
Power @ 50% duty cycle | 6 kVA |
Secondary voltage | 2.5 V |
* Supply voltage (@ 50 and 60 Hz) | 220 V (IN-STOCK) 440 V (available on request) |
Delayed fuses @ 220 VAC (IN-STOCK) | 20 A |
Delayed fuses @ 440 VAC | 12 A |
Primary cables (up to 10m) | 0.098 in. (2.5 mm) |
Short circuit current | 8,200 A |
Max welding current | 6,550 A |
Duty cycle w/max welding current | 6.70% |
Arm minimum / maximum length | 4.9 – 19.7 in. (125 – 500 mm) |
Arm spacing (gap) | 3.7 in. (94 mm) |
Arm | 0.87 in. (22 mm) |
Electrode holder | 0.55 in. (14 mm) |
Electrode diameter | – |
Electrode taper | 1MT/4RW |
Working stroke | 1.4 – 3.5 in. (35-90 mm) |
Max electrode force w/ 4.9″ (125 mm) arms | 264 lbs. (120 daN) |
Max electrode force w/19.7″ (500 mm) arms | 84 lbs. (38 daN) |
Pneumatic hose inside | 0.24 in. (6 mm) |
Compressed air supply | 87 psi (6 bar) |
Air per 1000 spots @ 72.5 psi (500 kP / 5 bar) | 35 SCF (1 N/m) |
Water hose inside | 0.24 in. (6 mm) |
Water cooling @ 36 psi (250 kP / 2.5 bar) | 0.66 gpm (2.5 lpm) |
Dimensions (L x W x H) | 4.3 x 18.7 x 8.0 in. (108 x 475 x 203 mm) |
Net weight | 35.2 lbs. (16 kg) |
Packing box dimensions | 11.0 x 24.0 x 14.2 in. (28 x 61 x 36 mm) |
Gross shipping weight | 44 lbs. (20 kg) |
Capacity mild steel sheet | 0.08 x 0.08 in. (2 x 2 mm) |
Capacity mild steel rod | 0.24 x 0.24 in. (6 x 6 mm) |
SPRING TOOL BALANCER | |
Working load required | 33 – 44 lbs. (15 – 20 kg) |
Short arms balancer required | 9362BR |
* May be supplied capable of operating on other voltages / frequencies. Please ask for details. |