NEW TECNA TE1600 Portable Weld Tester IN-STOCK

WSI-SELECT – In-Stock and For Sale at Weld Systems Integrators

TECNA TE1600 Portable Weld Tester

The TECNA TE1600 Portable Weld Tester is designed for measuring the parameters of resistance welding. By using probes of a different kind, the same instrument enables the measurement of both the welding current and the force at the electrodes. The power of the 32-bit microprocessor and the accuracy of the 12-bit A/D converter make the instrument a high-performing one.

WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.

TECNA Weld Testers IN-STOCK: 1

Quote RequestTECNA TE1600 Features

Please submit the following form to request additional information.

Enter “TECNA TE1600 Portable Weld Tester” on the following quote request form.

If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.

    Quote Request
    * Full Name:
    * Company Name:
    Postal Code / Zip:
    * Phone:
    * EMail:
    * Stock / Serial #:
    Tell us about your application:

    * Required

    If you have any issues submitting this form, please call Weld Systems Integrators at
    844-WSI-WELD or +1-216-475-5629.

    TECNA TE1600 Portable Weld Tester FEATURES

    It is suitable for measuring on standard machines in alternate current (AC), direct current three-phase rectified and medium frequency machines (DC), and capacitor discharge machines (CDW):


    • Measures the effective value (RMS), maximum value, and average value.
    • Measures the peak current value: maximum positive and negative value.
    • Measures the conduction angle in degrees.
    • Measures the welding time in cycles, in ½ cycle steps.

    DC: Measures the average value, the maximum value, and the welding time in ms.

    CDW: Measures the peak value and the welding time.

    Pre- and post-blanking function with programmable time gap; it prevents the measurement errors when the slope function is used and it allows the checkout of the correct first insertion delay.

    Stores the value measured during the last welds.

    Measures the welding force: it displays the maximum force value, the value at the beginning and at the end of the welding time.

    The blanking function prevents measurement errors due to high impact force and it allows to an estimate of the latter.

    Wide availability measurement transducers.

    Automatic recognition of the connected sensor.

    BNC output to display the current wave shape on oscilloscope.

    Supply by means of alkaline batteries 4 x 1.5 V (size AA).