NEW TECNA 4662 – Air Operated 50 KVA Rocker Arm Welder IN-STOCK

WSI-SELECT – In-Stock and For Sale at Weld Systems Integrators

NEW TECNA 4662 WSI Serial #: 60220039

NEW TECNA 4662 – Air Operated 50 kVA rocker arm spot welder [ WSI stock / serial #: 60220039 ] IN-STOCK and FOR SALE at Weld Systems Integrators.

  • Simple, fast setup and operation, with easy adjustment
  • 220 or 440V – dual-voltage welder works from 208-480, anywhere in your plant
  • Arms easily slide in and out for small and large parts
  • Access hard-to-reach welds with built-in angle / straight tip holders
  • Easy-to-program weld controls

WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.

EQUIPMENT QUOTE
Quote RequestFeaturesSpecificationsDocumentation

Please submit the following form to request additional information.

Enter WSI Serial #: 60220039 on the following quote request form.

If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.

    Quote Request
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    Country:
    * Phone:
    * EMail:
    * Stock / Serial #:
    Tell us about your application:

    * Required


    If you have any issues submitting this form, please call Weld Systems Integrators at
    844-WSI-WELD or +1-216-475-5629.

    • Air-operated, lube-free cylinder eliminates oil mist in the shop environment.
    • Electrode force is adjustable via an integrated filter/regulator combination.
    • Reduce shop noise with integrated speed control valves, shock absorber for end-of-cylinder stroke, and air exhaust mufflers.
    • Two-stage electronic foot switch initiation (1st stage closes tips without welding, 2nd stage initiates weld schedule.)
    • Pre-wired to accept a second footswitch (Option 72977).
    • A second footswitch allows immediate recall of a second weld time / current setting. This is helpful when different settings are required on the same workpiece.
    • PINCH POINT SAFETY OPTION: WSI-supplied TECNA Rocker Arm Welders are available with UNITROL Soft Touch Safety for pinch point protection.
    SPECIFICATIONS TECNA 4662
    WSI stock / serial number 60220039
    Foot or air-operated AIR
    Power @ 50% duty cycle 50 kVA
    Max power 104 kVA
    Secondary voltage 6.1 V
    Maximum Short Circuit Current 21000 A
    Thermal current @ 100% 5.7 kA
    Supply voltage (@ 60Hz)* Dual Voltage 220 / 440 V
    Delayed fuses @ 220 VAC 175 A
    Delayed fuses @ 440 VAC 100 A
    Primary cables (up to 30m) 0.05 in. (35 mm2)
    Insulation class F
    Compressed air supply 94 psi (6.5 bar)
    Air consumption per 1000 spots @ 94 psi (650 kP / 6.5 bar) 219 – 159 SCF (6.2 – 4.5 N / m3)
    Arm minimum length 11 in. (280 mm)
    > Max electrode force @ 94 psi (6.5 bar) 935 lbs. (425 daN)
    > Working stroke 0.2 – 2 in. (5 – 50 mm)
    Arm maximum length 23.6 in. (600 mm)
    > Max electrode force @ 94 psi (6.5 bar) 462 lbs. (210 daN)
    > Working stroke 0.2 – 3.7 in. (95 mm)
    Short circuit current with arms @ max length 14.3 kA
    Adjustable arm gap assembly (OPTION 4638)
    Short circuit current with arms @ max length 12600 A
    Minimum gap 7.7 in. (195 mm)
    Maximum gap 19.7 in. (500 mm)
    Water cooling @ 36 psi (250 kP / 2.5 bar) 1.1 gpm (4 lpm)
    Minimum water pressure 36 psi (2.5 bar)
    Aerial noise produced 70+
    Measured conditions
    Working stroke 200.79 in. (20 mm)
    Welding time 15 cycles
    Welding current 16 kA
    Working rating (welds per minute) 15 # / min.
    Net weight 502 lbs. (228 kg)
    Arms 1.97 in. (50 mm)
    Electrode holders 1.0 in. (25 mm)
    Electrode taper size 5RW/2MT

    TECNA 4662, 4666 Rocker Arm Welders Catalog

    * Download the TECNA 4662, 4666 catalog ( PDF )

    TECNA 4640 – 4644 Installation Manual

    * Download the TECNA 4645 – 4649 installation manual ( PDF )