TECNA 9523ES Tool Balancers IN-STOCK

Zero-Gravity ESD Protection Balancer

TECNA 9523ES Tool Balancers

The 9523ES ESD protection zero-gravity balancer is a NEW product line designed for electronics assembly and ESD-protected applications. The 9523ES features a double aluminum housing, stainless steel cable, and anti-electrostatic materials with a capacity of 88.19 – 110.23 lbs. (40.0 – 50.0 kg) and a stroke length of 106.30 in. (2700 mm).

Balancer Designation: 9523ES
  • Stainless steel cable balancer with double aluminum housing
  • OPTION “.F” version includes brake/friction device

WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.

TECNA 9523ES Balancers IN-STOCK: 7

EQUIPMENT QUOTE
Quote RequestSpecificationsStandard FeaturesOptional Features

Please submit the following form to request additional information.

Enter “TECNA 9523ES” on the following quote request form.

If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.

    Quote Request
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    Country:
    * Phone:
    * EMail:
    * Stock / Serial #:
    Tell us about your application:

    * Required


    If you have any issues submitting this form, please call Weld Systems Integrators at
    844-WSI-WELD or +1-216-475-5629.

    SPECIFICATION UNITS TECNA 9523ES
    Lower capacity lbs. 88.19
    kg 40.00
    Upper capacity lbs. 110.23
    kg 50.00
    Stroke length in. 106.30
    mm 2700
    Rope type Stainless steel
    Body material Double aluminum
    Zero-gravity balancer Yes
    Friction brake [ option .F ] Included
    ATEX-rated explosion-resistant No
    Floor locking-unlocking device [ optional accessory “BC” ] Not included
    Conductive rotating hook [ optional accessory “RC” ] Not included

    TECNA balancers make tools nearly weightless, reducing operator fatigue and improving safety and ergonomics. As the tool is repositioned the stainless steel cable extends and retracts smoothly from the aluminum housing, providing a full range of motion. Tension adjustment is easy and precise.

    • The ribbed protection version is available
    • Ribbed and sealed monobloc construction in aluminum alloy
    • Stainless steel rope
    • Adjustable capacity using a worm screw
    • Safety suspension
    • Safety device against load dropping due to the spring breakage (>3kg)
    • Centrifugal safety device
    • Upper rotary suspension with safety hook
    • Locking device to block the load at any height
    • Adjustable stroke limiting device
    • Taper drum rotating on ball bearings
    • Cable guide in antifriction material
    • Rotary upper hook with ball bearing
    • Lining up the upper hook
    • Visible cable for inspection
    • Inert spring drum assembly
    • Polyamides thimble

    * Features and specifications may vary and are subject to change without notice

    Available for specific models, please contact a Weld Systems Integrators customer service representative for help selecting the right product for your application.

    OPTION .F: Brake device. Friction/brake which controls the rotation speed of the drum. This option is feasible when placing a new order while it is not possible to assemble this device on balancers already installed.

    Balancer models 9346LES – 9350ES are equipped with a stop device allowing the load to be stopped in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.

    TECNA recommends OPTIONAL ACCESSORY “RC”: Rotary and insulating device for ESD zero-gravity balancers.

    OPTIONAL ACCESSORY “BC”: Locking-unlocking device with control from the floor.

    Related products