TECNA TE9523.B Zero-Gravity Tool Balancer

Stainless Steel Wire Rope | 88.2 – 110.2 lbs. Capacity

Model: TECNA TE9523.B

The TECNA TE9523.B zero-gravity tool balancer FOR SALE at Weld Systems Integrators features a double aluminum housing and suspends the tool on a stainless steel wire rope for 88.2 – 110.2 lbs. (40 – 50 kg) loads. OPTION “.B” version – is equipped with the locking-unlocking device with control from the floor. It’s not possible to assemble this device on balancers already installed.

  • Stainless steel cable
  • Double aluminum housing
  • Stroke: 106 in. (2700 mm)
  • Capacity: 88.2 – 110.2 lbs. (40 – 50 kg)
  • Locking-unlocking device – OPTION “.B”
  • OPTIONAL Accessory: Rotary insulating device

Current IN-STOCK Inventory: 0

* TYPICALLY IN-STOCK model at WSI, a stocking master distributor of TECNA industrial tool balancers. We maintain an inventory at our Warrensville Heights, Ohio location. Contact our knowledgeable sales team at 844-WSI-WELD or 216-475-5629 for current availability.

Quote RequestSpecificationsFeatures and AccessoriesBalancer Selection Guide

Please submit the following form to request additional information.

Enter “TECNA TE9523.B” on the following quote request form.

If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or 216-475-5629 and ask to speak with a WSI Engineer.

    Contact Information
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    * Country:
    * Phone:
    * Email:
    Preferred way to be contacted:
    Equipment Needs Model / Serial Number: * Tell us about your application (what are you welding?): Send us a photo of your parts:

    * Required


    If you experience any issues submitting this form, please give us a call at 844-WSI-WELD or 216-475-5629.

    SPECIFICATION UNITS TECNA TE9523.B
    Lower capacity lbs. 88.2
    kg 40.0
    Upper capacity lbs. 110.2
    kg 50.0
    Stroke length in. 106
    mm 2700
    Rope type Stainless steel
    Body material Double aluminum
    BALANCER VERSION
    Friction brake (version .F) not available
    Shock absorbent coating (version G) Available
    Locking / unlocking device (version .B) INCLUDED
    Stainless steel locking / unlocking device (version .B1) not available
    OPTIONAL ACCESSORY
    Rotary insulating device (70477) Available
    Conductive rotary suspension (7270000004) not available
    Conductive locking / unlocking device (7190000004) not available
    Rubber cover (37827) not available

    TECNA balancers make tools nearly weightless, reducing operator fatigue and improving safety and ergonomics. As the tool is repositioned the stainless steel cable extends and retracts smoothly from the aluminum housing, providing a full range of motion. Tension adjustment is easy and precise.

    • Ribbed and sealed monobloc construction in aluminium alloy.
    • Stainless steel rope.
    • Adjustable capacity by means of a worm screw.
    • Auxiliary safety suspension.
    • Safety device against load dropping due to the spring breakage (>3kg).
    • Centrifugal safety device
    • Upper rotary suspension with safety hook.
    • Locking device to block the load at any height.
    • Adjustable stroke limiting device.
    • Taper drum rotating on ball bearings.
    • Cable guide in antifriction material.
    • Rotary upper hook with ball bearing.
    • Lining up upper hook.
    • Inert spring drum assembly. 

    * Features and specifications may vary and are subject to change without notice

    OPTIONAL Accessory: Rotary Insulating Device (70477)

    Swivel hook for TECNA balancers provides electrical isolation of the hook area. In addition, the swivel action protects the balancer cables from stray wires. This protection allows the balancer to turn a full 360 degrees without damaging the hook.

    Totary-insulating-device-70477

    Available for certain models, please contact a customer service representative for help selecting the right product for your application.

    VERSION “.F” is equipped with a friction / brake which controls the rotation speed of the drum.

    VERSION “.B” includes the locking-unlocking device with control from the floor. It is not possible to assemble this device on balancers already installed.

    VERSION “.B1” includes the locking-unlocking device with control from the floor (chain and handle in stainless steel ). It is not possible to assemble this device on balancers already installed.

    VERSION “G” includes shock absorbent rubber coating.

    OPTIONAL ACCESSORY “RI” – Rotary insulating device (swivel hook) which provides electrical isolation of the hook area. In addition, the swivel action protects the balancer cables from stray wires. This protection allows the balancer to turn a full 360 degrees without damaging the hook.

    OPTIONAL ACCESSORY “RC” – Conductive rotary insulating device.

    OPTIONAL ACCESSORY “BC” – Conductive locking-unlocking device with control from the floor.

    OPTIONAL ACCESSORY “RUBBER GUARD” – Prolongs balancer life by protecting from bumps and dings.

    Related products