TECNA 7902 Portable Spot Weld Gun

2.5 kVA | Hand-Operated | Single-Phase AC

(844) WSI-WELD
(216) 475-5629
EMail WSI
EQUIPMENT QUOTE

TECNA 7902 Portable Weld Gun

The TECNA 7902 is a 2.5 kVA, hand-operated, single-phase AC portable weld gun. The TECNA 7902 weld gun is ready to weld right out of the box and is suitable for two pieces of 0.098 in. (2.5 mm) mild steel. Featuring standard 4.9 in. (125 mm) arms – part #7401, the TECNA 7902 can be customized with 9.8, 13.8 and 19.7 in. (250, 350 and 500 mm) arms. The TECNA 7902 is the perfect portable spot welder for auto body repair shops, and maintenance shops.

  • Model: TECNA 7902
  • Gun type: Scissor-type
  • Power @ 50% duty cycle:  2.5 kVA
  • Power supply:  Single-phase AC
  • Max. weld current: 5,750 amps
  • Max. weld force: 270 lbs.
  • Max. electrode throat depth: 19.69
  • Recommended tool balancers: TECNA 9356 and 9357

Current IN-STOCK Inventory: 13

* TECNA 7902 portable weld guns are typically IN-STOCK at Weld Systems Integrators. WSI maintains an inventory at our Warrensville Heights, Ohio location. Give us a call at 844-WSI-WELD, 216-475-5629, or complete the form below to verify available inventory.

Quote RequestFeaturesSpecifications

Please submit the following form to request additional information.

Enter “TECNA 7902” on the following quote request form.

If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or 216-475-5629 and ask to speak with a WSI Engineer.

    Contact Information
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    * Country:
    * Phone:
    * Email:
    Preferred way to be contacted:
    Equipment Needs Model / Serial Number: * Tell us about your application (what are you welding?): Send us a photo of your parts:

    * Required


    If you experience any issues submitting this form, please give us a call at 844-WSI-WELD or 216-475-5629.

    • Welds right out of the box
    • 220V / 60 Hz / single-phase AC
    • Comes standard with 4.9 in. (125 mm) arms – part #7401
    • Can weld up to 2 pieces of 0.098 in. (2.5 mm) steel
    • Weld force: 270 lbf. (120 daN) *
    • Throat depth: 4.92 in. (125 mm) *
    • Easily mounts to bench ¥ Synchronous built-in electronic timer with SCR from 2 to 65 cycles
    • Pulsation weld time control available (P version)
    • Weighs 24 lbs. (11 kg) plus arms
    • No shop air or water cooling required
    • Recommended tool balancers: TECNA 9356 and 9357

    * Weld force and throat depth based on standard 4.9 in. (125 mm) arms. Longer arms available on request.

    SPECIFICATIONSMODEL790079027903
    Nominal power 50%kVA22.56
    Continuous powerkVA1.411.774.25
    Max. short circuit powerkVA16.520.520.5
    Max. welding powerkVA131616
    Secondary no load voltageV2.32.52.5
    MAINS SUPPLY
    Nominal primary voltage / frequency* V/Hz220/60 (In-Stock) - 440/60 (Available on Request)220/60 (In-Stock) - 440/60 (Available on Request)220/60 (In-Stock) - 440/60 (Available on Request)
    Connection powerkVA9.513.513.5
    Delayed fusesA20 @ 220 - 12 @ 44020 @ 220 - 12 @ 44020 @ 220 - 12 @ 440
    Primary cross section cable Length < 15 min2 (mm2)0.004 (2.5)0.004 (2.5)0.004 (2.5)
    SECONDARY CURRENT
    Nominal currentkA0.8712.4
    Continuous currentkA0.610.71.7
    Short circuit currentkA7.28.28.2
    Max. welding currentkA5.756.556.55
    Duty cycle with max. weld current%1.11.16.7
    ARMS AND ELECTRODES
    Arms lengthin. (mm)4.92 - 19.69 (125 - 500)4.92 - 19.69 (125 - 500)5.91 - 19.69 (150 - 500)
    Arms gapin. (mm)3.78 (96)3.70 (94)3.70 (94)
    Armsø in. (mm)0.79 (20)0.87 (22)0.87 (22)
    Arms-holders øø in. (mm)0.71 (18)0.71 (18)0.71 (18)
    Electrode-holders øin. (mm)'-'-0.55 (14)
    Electrode øin. (mm)0.39 (10)0.47 (12)ø 0.43 - 5° (10.8-5°)
    Min-max. electrode strokein. (mm)2.17 - 7.28 (55 - 185)2.17 - 7.28 (55 - 185)2.17 - 7.28 (55 - 185)
    Electrode force with L=125 armsdaN120120120
    Electrode force with L=500 armsdaN383838
    COMPRESSED AIR
    Hose connectionø in. (mm)'-'-'-
    Max. operating pressurebar'-'-'-
    Air consumption for 1000 spotsNm3'-'-'-
    WATER COOLING
    Hose connection: inlet: outletø in. (mm)'-'-0.24 (6)
    Max. operating pressurebar'-'-2.5
    Consumption at full loadl/h'-'-150
    DIMENSIONS
    Width/depth/heightø in. (mm)3.54 - 14.57 - 9.06 (90 - 370 - 230)3.54 - 14.57 - 9.06 (90 - 370 - 230)3.54 - 14.57 - 9.06 (90 - 370 - 230)
    Net weightlbs. (kg)23.15 (10.5)24.25 (11)26.46 (12)
    Gross weightlbs. (kg)26.46 (12)28.66 (13)33.07 (15)
    Box: width/depth/heightcm17-46-3517-46-3528-61-36
    Mild steel sheetsin. (mm)0.08 - 0.08 (2 + 2)0.10 - 0.10 (2.5 + 2.5)0.08 - 0.08 (2 + 2)
    Mild steel rodsø in. (mm)0.24 - 0.24 (6 + 6)0.32 - 0.32 (8 + 8)0.24 - 0.24 (6 + 6)
    Aerial noise produceddB(A)<70<70<70
    Level of vibrationsm/s2<2.5<2.5<2.5

    Related products