TECNA 9524AX ATEX-Rated Zero-Gravity Tool Balancers
Balancers for use in environments having potentially explosive atmospheres for GAS
TECNA 9524AX Tool Balancers
The TECNA 9524AX ATEX-Rated tool balancer is an explosion-resistant / zero-gravity balancer, suitable for use in environments having potentially explosive atmospheres for GAS and DUST. TECNA zero-gravity technology provides nearly weightless tool operation for 110.23 – 132.28 lbs. (50 – 60 kg.) loads and a stroke length of 106.30 in. (2700 mm).
Balancer Designation: 9524AX
- Stainless steel cable balancer with double aluminum housing
- OPTION “.F” version includes brake/friction device
- ATEX Gas Classification: II 2G Ex h IIB T6 Gb
- ATEX Dust Classification: II 2D Ex h IIIC T85°C Db
WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.
TECNA 9524AX Balancers IN-STOCK: 9
EQUIPMENT QUOTEPlease submit the following form to request additional information.
Enter “TECNA 9524AX” on the following quote request form.
If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.
| SPECIFICATION | UNITS | TECNA 9524AX |
|---|---|---|
| Lower capacity | lbs. | 110.23 |
| kg | 50.00 | |
| Upper capacity | lbs. | 132.28 |
| kg | 60.00 | |
| Stroke length | in. | 106.30 |
| mm | 2700 | |
| Rope type | Stainless steel | |
| Body material | Double aluminum | |
| Zero-gravity balancer | Yes | |
| Friction brake [ option .F ] | Not included | |
| ATEX-rated explosion resistant | Yes | |
| ATEX gas classification | II 2G Ex h IIB T6 Gb | |
| ATEX dust classification | II 2D Ex h IIIC T85°C Db | |
| Floor locking-unlocking device [ optional accessory “BC” ] | Not included | |
| Conductive rotating hook [ optional accessory “RC” ] | Not included | |
TECNA balancers make tools nearly weightless, reducing operator fatigue and improving safety and ergonomics. As the tool is repositioned the stainless steel cable extends and retracts smoothly from the aluminum housing, providing a full range of motion. Tension adjustment is easy and precise.
- Ribbed and sealed monobloc construction in aluminum alloy
- Stainless steel rope
- Adjustable capacity using a worm screw
- Safety suspension
- Safety device against load dropping due to the spring breakage (>3kg)
- Centrifugal safety device
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Taper drum rotating on ball bearings
- Cable guide in antifriction material
- Rotary upper hook with ball bearing
- Lining up the upper hook
- Inert spring drum assembly
- Operating temperature between + 5°C to + 60°C
* Features and specifications may vary and are subject to change without notice
Available for specific models, please contact a Weld Systems Integrators customer service representative for help selecting the right product for your application.
OPTION .F: Brake device. Friction/brake which controls the rotation speed of the drum. This option is feasible when placing a new order while it is not possible to assemble this device on balancers already installed.
Balancer models 9346LAX – 9350AX are equipped with a stop device allowing to stop the load in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.
TECNA recommends OPTIONAL ACCESSORY “RC”: Rotary and insulating device for ATEX-rated zero-gravity balancers.
OPTIONAL ACCESSORY “BC”: Locking-unlocking device with control from the floor.
