TECNA TE9354G Stainless Steel Cable Zero-Gravity Tool Balancer

Standard or General Purpose Balancers | Stainless Steel Cable

TECNA Standard Balancer - Rubber-Covered -9354G-9355G-9356G-9357G-9358G-9359G

TECNA TE9354G stainless steel cable zero-gravity balancers FOR SALE at Weld Systems Integrators. TE9354G balancers feature a double aluminum – rubber-covered housing and suspend the tool on a stainless steel wire cable / rope. TECNA zero-gravity balancers use a conical drum, calibrated to provide constant upward tension that counterbalances the weight of the suspended tool or load. This achieves a floating neutral support where gravity is essentially negated, allowing near-effortless positioning, while maintaining the operator’s last position.

NOTE: The “G” version includes shock absorbent rubber coating.

  • Stainless steel cable
  • Double aluminum – rubber-covered housing
  • Stroke length: 79 in. (2000 mm)
  • Capacity: 8.8 -15.4 lbs. (4.0 – 7.0 kg)

Balancer Price:

$558.00

Current IN-STOCK Inventory:

ON BACKORDER

Add to Cart

* See Purchasing Notes for large orders, and backorder / out-of-stock purchasing.

Additional information

Weight 13.23 lbs
Dimensions 16.5 × 8.1 × 6.5 in
Brand

TECNA
Equipment Category

Tool Balancer
Model

TE9354G
Buy Now

No
Balancer Style

Zero-Gravity Balancer
Balancer Family

Standard
Balancer Cable / Rope Type

Stainless Steel
Balancer Body Material

Double Aluminum – Rubber-Covered
Balancer Stroke Length (in.)

79
Balancer Lower Capacity (lbs.)

8.8
Balancer Upper Capacity (lbs.)

15.4

TECNA Standard Balancer Features

Standard Retractor Balancers

  • Rugged construction, cast aluminum or nylon housing
  • Stainless steel rope
  • Adjustable capacity
  • Auxiliary safety suspension
  • Safety device against load dropping due to the spring breakage (>3kg)
  • Adjustable stroke limiting device
  • Cable guide in antifriction material
  • Inert spring drum assembly
  • Polyamides thimble

Standard Zero-Gravity Balancers

  • Ribbed and sealed monobloc construction in aluminum alloy
  • Stainless steel rope
  • Adjustable capacity by means of a worm screw
  • Auxiliary safety suspension
  • Safety device against load dropping due to the spring breakage (>3kg)
  • Centrifugal safety device
  • Upper rotary suspension with safety hook
  • Locking device to block the load at any height
  • Adjustable stroke limiting device
  • Taper drum rotating on ball bearings
  • Cable guide in antifriction material
  • Rotary upper hook with ball bearing
  • Lining up upper hook
  • Visible cable for inspection
  • Inert spring drum assembly

Features may vary, and are subject to change without notice. Questions, please contact your TECNA representative.

TECNA Standard Balancer Selection Guide

Available for certain models, please contact a customer service representative for help selecting the right product for your application.

VERSION “.F” is equipped with a friction / brake which controls the rotation speed of the drum.

VERSION “.B” includes the locking-unlocking device with control from the floor. It is not possible to assemble this device on balancers already installed.

VERSION “.B1” includes the locking-unlocking device with control from the floor (chain and handle in stainless steel ). It is not possible to assemble this device on balancers already installed.

VERSION “G” includes shock absorbent rubber coating.

OPTIONAL ACCESSORY “RI” – Rotary insulating device (swivel hook) which provides electrical isolation of the hook area. In addition, the swivel action protects the balancer cables from stray wires. This protection allows the balancer to turn a full 360 degrees without damaging the hook.

OPTIONAL ACCESSORY “RUBBER GUARD” – Prolongs balancer life by protecting from bumps and dings.

If you have questions or would like help selecting the right standard retractor or zero-gravity balancers for your application, don’t hesitate to get in touch with a customer service representative at 844-WSI-WELD or 216-475-5629. or salesteam@wsiweld.com.

TECNA Balancer Purchasing Notes

* LARGE ORDERS: For orders of 10 balancers or more, please contact Weld Systems Integrators at 844-WSI-WELD, 216-475-5629 or EMAIL, and we will assist with your requirements. Large orders may be subject to additional discounts.

* BACKORDER and OUT OF STOCK TECNA balancers are available for purchase. Please allow 30-40 days for production and 3-4 weeks for shipping from Italy to the United States. Contact a WSI team member with any questions.

    Contact Information
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    * Country:
    * Phone:
    * Email:
    Preferred way to be contacted:
    Equipment Needs Model / Serial Number: * Tell us about your application: Send us a photo of your parts:

    * Required


    If you experience any issues submitting this form, please give us a call at 844-WSI-WELD or 216-475-5629.

    Related products