TECNA 9509.F Tool Balancers IN-STOCK
Standard zero-gravity stainless steel cable balancer with double aluminum housing.
TECNA 9509.F Tool Balancers
The TECNA 9509.F is a standard zero-gravity tool balancer with a double aluminum housing and suspends the tool on a stainless steel wire rope for 198.42 – 220.46 lbs. (90.00 – 10.00 kg.) loads and a stroke length of 82.68 in. (2100 mm).
- Zero-gravity balancer
- Stainless-steel wire rope with double aluminum housing
- INCLUDES friction brake [ option .F ]
WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or +1-216-475-5629 for immediate assistance.
TECNA 9509.F Balancers IN-STOCK: 1
EQUIPMENT QUOTEPlease submit the following form to request additional information.
Enter “TECNA 9509.F” on the following quote request form.
If you have any questions on WSI Select – IN-STOCK equipment available from Weld Systems Integrators, please call 844-WSI-WELD or +1-216-475-5629 and ask to speak with a WSI Engineer.
| SPECIFICATION | UNITS | TECNA 9509.F |
|---|---|---|
| Lower capacity | lbs. | 198.42 |
| kg | 90.00 | |
| Upper capacity | lbs. | 220.46 |
| kg | 100.00 | |
| Stroke length | in. | 82.68 |
| mm | 2100 | |
| Zero-gravity balancer | Yes | |
| Rope type | Stainless steel | |
| Body material | Double aluminum | |
| Friction brake [ option .F ] | Included | |
| Shock absorbent rubber coating [ option G ] | Not included | |
| Floor locking-unlocking device [ option .B ] | Not included | |
| Floor locking-unlocking device (stainless steel chain and handle) [ option .B1 ] | Not included | |
| Insulated rotating hook [ optional accessory ] | Not included | |
| ATEX-rated explosion-resistant | No | |
TECNA balancers make tools nearly weightless, reducing operator fatigue and improving safety and ergonomics. As the tool is repositioned the stainless steel cable extends and retracts smoothly from the aluminum housing, providing a full range of motion. Tension adjustment is easy and precise.
- Cast aluminum housing with special hard anodization, resistant to oxidation and chemical aggression
- Smoother surface facilitates cleaning and sanitization
- Food grade rope guide, shock absorber, and wire cap
- Rustproof and stainless steel exterior materials
- NSF-H1 certified food grade grease
- Ribbed and sealed monobloc construction in aluminum alloy
- Stainless steel rope
- Adjustable capacity by means of a worm screw
- Auxiliary safety suspension
- Safety device against load dropping due to the spring breakage | >3k
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Taper drum rotating on ball bearings
- Cable guide in antifriction material
- Inert spring drum assembly
- Polyamides thimble
* Features and specifications may vary, and are subject to change without notice
Available for specific models, please contact a customer service representative to help you select the right product for your application.
OPTION .F: Brake device. Friction/brake which controls the rotation speed of the drum. This option is feasible when placing a new order while it is not possible to assemble this device on balancers already installed.
OPTIONAL ACCESSORY: Locking/unlocking device with control from the floor.
[ NOTE: Option .B and .B1 on some TECNA balancer models ].
TECNA recommends OPTIONAL ACCESSORY: Rotary and insulating device for ALL zero-gravity balancers.
OPTION G: Shock absorbent rubber coating.
[ Available on TECNA balancer models 9354 – 9359, 9361 – 9371, 9401 – 9426, and 9431 – 9456 ]
OPTION .B: Locking/unlocking device with control from the floor.
[ Available on TECNA balancer models 9361 – 9371, 9401 – 9426, and 9431 – 9456 ]
OPTION .B1: Locking/unlocking device with control from the floor (stainless steel chain and handle).
[ Available on TECNA balancer models 9361 – 9371, 9401 – 9426, and 9431 – 9456 ]
