ENTRON Controls

ENTRON Resistance Welding Controls EN6001 available from Weld Systems Integrators, Inc.

Partner Logo - Entron | Weld Systems Integrators

ENTRON Controls, LLC. develops and manufactures advanced weld controls for automotive, industrial and consumer products. ENTRON is working with weld machine integrators and end-users to bring our new control products for Servo-driven applications and Risk Reduction to the manufacturing floor. Weld Systems Integrators is a distributor of ENTRON resistance welding controls, keeping an inventory of IN-STOCK at our Warrensville Heights location for quick shipment and delivery.

EN6001 CONSTANT CURRENT AC CONTROLS

LOW COST | EASIER TO PROGRAM | MORE I/O | USB BACKUP PORT ENTRON EN-6011 Retrofit | Weld Systems Integrators

EN6001 Single-Phase AC Constant Current Resistance Welding Controls now has more features and improved user interface.

Benefits
  • Schedule Number: 0 to 63
  • Squeeze Delay: 0 to 99 cycles
  • Squeeze: 0 to 99 cycles
  • Valve Mode: None / All combinations of 3 valves
  • Weld1: 0 to 99 cycles
  • Weld1 Current Regulation Mode: Phase Shift / Constant Current
  • Heat1: 0 to 99%
  • Current1: 0 to 100.00 kA
  • Cool1: 0 to 99 cycles
  • Slope: 0 to 99 cycles
  • Weld2: 0 to 99 cycles
  • Weld2 Current Regulation Mode: Phase Shift / Constant Current
  • Heat2: 0 to 99%
  • Current2: 0 to 100.00 kA
  • Cool2: 0 to 99 cycles
  • Hold: 0 to 99 cycles
  • Off: 0 to 99 cycles
  • Impulses: 1 to 99 cycles
  • Heat/Current Offset: -15 to +15%
  • Cycle Mode: Non-repeat / Repeat / Chained / Successive / Wait-here

Options
  • Program Lockout (key switch)
  • Operation Mode Switch (Program Lockout and Weld/No Weld)
  • Error Reset Switch
  • Optional plug-in Ether- net/RS232/RS485 cards provides PLC compatibility via MODBUS and EtherNet/IP for remote I/O
Features
  • Constant current regulation / Secondary feedback
  • Current monitoring with high, low, and pre-limits
  • Up to 64 programs (internal or external selection)
  • On Timer Membrane Keyboard with backlit 128×64 (8 lines) LCD graphic display
  • Six (6) inputs and four (4) outputs with output protection on CPUElectrode management functions, including stepping, current and force counting, tip-dressing and preset curves
  • Welding programs may be linked together for complex spot schedules (chained or successive) Refresh firmware through USB device
  • Load/export control settings from/to USB device
  • AC 60/50 Hz welding supported
  • Spot / Pulsation / Seam (quad heat) / Seam welding / Flash or Butt welding / Brazing
  • Multiple weld intervals plus pulsation, upslope and downslope
  • Air-over-oil gun operation
  • Retraction – maintained, and momentary
  • Water Saver (contactor timer)
  • Head lock function
Weld Systems Integrators is your complete source for resistance welding equipment, consumables, parts and accessories with WORLDWIDE shipping. For more information, or to request a quote, please give us a call at 844-WSI-WELD or +1-216-475-5629.